Filter Cleaning
FilterCare™
Cleaning Service.
Proper filtration is one of the most important components of pool care. When your filter isn't working the way it should, your chemistry can't keep up, your water loses clarity, and your equipment runs harder than it needs to. FilterCare™ is the breakdown, cleaning, and inspection of your filter, performed as its own visit on a schedule that fits your pool.
What's Included
Every FilterCare™ Visit.
Every visit covers three things: the filter clean itself, a Pool Equipment Inspection, and a digital report delivered the same day.
Filter Cleaning
Your Technician breaks down your filter, cleans each element thoroughly, and reassembles it.
- Break down the filter housing
- Remove cartridges or grids
- Clean each filter element (rinse thoroughly)
- Inspect cartridges or grids for wear or damage
- Reassemble the filter
- Run system and verify filter pressure is back to normal
Pool Equipment Inspection
Every FilterCare™ visit includes a Pool Equipment Inspection. While onsite, your Technician does a visual check of your equipment for obvious issues.
- Visual inspection for air leaks and water leaks
- Check pump and filter functionality
- Visual inspection of plumbing and valves
- Check pump and skimmer baskets for cracks
- Document any issues found in your digital report
If anything found needs a closer look, we'll recommend a Pool Equipment Diagnostic.
Documentation
Every FilterCare™ visit ends with a digital report delivered the same day, documenting the cleaning and anything we found.
- Before and after photos of your filter
- Notes on the cleaning performed
- Pool Equipment Inspection findings
- Recommendations for any follow-up needed
- Visit date and time stamps
Why Filters Need Cleaning.
Your pool's filter is the piece of equipment that pulls debris, oil, sunscreen, bacteria, and microscopic particles out of the water before it returns to the pool. Over time, all of that builds up inside the filter and restricts the water flow. As the pressure climbs, the flow drops, and your pool water stops being filtered the way it should.
A dirty filter can't keep up no matter how good the chemistry is or how well the pool is cleaned. Breaking down the filter and cleaning each component restores flow, restores filtration, and lets the rest of your pool care work the way it's supposed to.
How Often Filters Need Cleaning.
The standard recommendation is three to four times a year. Most pools land somewhere in that range, but the actual number depends on your specific pool: the size of your filter, the environment around your pool, sun exposure, how often the pool is used, your other equipment, and whether pets or pests are getting in the water. Some pools may need cleanings more often than the standard recommendation due to these factors.
The Pool Boys monitors filter pressure on every weekly visit, so for weekly customers, we know when your filter is due. For Quarterly FilterCare™ Program customers, we call to schedule each cleaning when it's time. For one-time customers, you call us when you are ready for service.
Before & After.
FilterCare™ Pricing
Pricing By Service Type.
Every FilterCare™ visit includes the Pool Equipment Inspection. Pricing varies by service type.
TotalCare™ Weekly and ChemCare™ Weekly customers pay the discounted rate. We monitor filter pressure on every weekly visit and schedule your cleaning when it's time. Quarterly cleaning recommended.
A recurring quarterly cleaning program for customers not on Weekly Pool Service. We schedule four cleanings per year, roughly every three months. We keep a card on file and call to confirm each visit before we perform the service. Billing happens after each cleaning. No contract, cancel anytime.
A single filter cleaning with no recurring schedule. Includes the Pool Equipment Inspection and a same-day digital report.
Frequently Asked
Questions about FilterCare™.
A typical FilterCare visit typically takes between 30 minutes and 1 hour, depending on your filter type, how dirty the filter is, and what your equipment looks like at the time. Cartridge filters tend to be faster. DE filters take longer because each grid has to be cleaned individually. We work efficiently but we don't rush the cleaning, because a half-cleaned filter doesn't do its job.
We service cartridge filters, DE filters, and sand filters. Most residential pools in Greater Houston run cartridge or DE; sand filters are less common but still in service. FilterCare™ only applies to Cartridge and DE Filters. Sand filters require sand changes, which is a completely different process. If you are not sure what type of filter you have, give us a call and we can figure it out from there.
No. We just need access to your equipment pad. Most of our customers leave a gate code or an unlocked side gate. If you would like to be home for your first FilterCare visit so you can see what gets done, we welcome this too.
If we find something during the Pool Equipment Inspection that needs attention, we document it in your digital report and our office calls you to talk through what we found. Most commonly we find filter elements (DE Grids or Cartridges) that need replaced, o-rings that need replaced, or a cracked manifold that needs replaced. If we find something we will let you know whether it needs immediate attention or can wait. If something needs a Pool Equipment Diagnostic, an equipment Technician will be scheduled to come out and evaluate it more thoroughly.
Cartridges should be replaced every two to three years depending on how often they are cleaned and the conditions your pool sees. DE grids can last a little longer in some cases. Most commonly they will eventually tear or develop holes that bypass the filtering. During the FilterCare visit, your Technician inspects each component for damage. If a cartridge or grid is at end of life or damaged, we document it in your report and recommend a replacement. A lot of times we can complete repairs at the same time as the FilterCare service, as long as we get approval and have the necessary parts.
Backwashing is different from a FilterCare cleaning. Backwashing reverses water flow through a DE or sand filter to flush out some of the loose debris, but it does not get the filter back to clean baseline. Cartridge filters cannot be backwashed at all. Over time, oils, fine debris, and buildup work into the filter elements and only a proper breakdown and cleaning can get them out. Backwashing buys some time between cleanings; it does not replace them.
Some pool owners do clean their own filters, however we recommend having it done professionally for safety reasons. The work involves shutting down your system, breaking down the filter housing, removing and cleaning each component (sometimes including chemical soaking for DE grids or heavily loaded cartridges), inspecting for damage, and reassembling everything correctly. If anything is reassembled wrong, you can damage the filter, create a leak, or cause a safety issue. If you would like to do your own filter cleaning, we recommend the AquaStar Pipeline Filter for its safe design and easy cleaning.
Ready for a filter cleaning?
Whether your filter pressure is climbing or it's just time for a cleaning, give us a call at 832-473-5715, or contact us online, and we'll get you on the schedule.
Schedule Your Service- 4.9 Google
- BBB A+
- Since 2011
- 100% Digital Reports
- Lic. TICL728